Designed to clean up jewelry pieces quickly and easily, the CMF-300 is a centrifugal magnetic finisher that has a 3 inch bowl that can accommodate up to six rings per cleaning cycle. Offering a steel pin capacity of up to 50 grams, the finisher has a mechanical timer with a fixed speed and a 1/32 hp motor. When used with soft, nonferrous metals, finishing cycles can be as little as 30 minutes, ensuring quick turnaround time and improved productivity. Operating on 115V or 230V, the unit should be used with only stainless steel pins and Compound M solution. Contact: Raytech, 475 Smith St., Middletown, CT 06457; 1-860-632-2020; fax 632-1699; e-mail raysales@lymanp roducts.com; raytech-ind.com.
Suitable for use with platinum, gold, silver, and other soft jewelry metals, the UltraMax Mini Ultrasonic Polishing System is designed to enable precision finishing in the smallest areas. Harnessing high-frequency, low-amplitude ultrasonic technology to leave a bright, burnished surface, the system comes with a mirror-like finish carbide burnishing tip that glides across metal surfaces. The ergonomically designed handpiece operates in a continuous mode with a constant, almost imperceptible impact governed by the variable rheostat dial. Contact: Gesswein Co., 201 Hancock Ave., Bridgeport, CT 06605; 1-203-366-5400; fax 366-3953; e-mail email@example.com; gesswein.com.